Samsung S5292 Flash Done By HWK - Samuel Tech

Samsung S5292 Flash Done By HWK - Samuel Tech

ScreenShot

Flashfile i Download duh chuan a hnuaia mi hi Click rawh....

 

Download 

Flash dan tur:-

- Turn off the device, And then remove the its SIM card and memory card too.

- From the FlashTool folder run FlashTool_E2.exe program.

- Add the firmware files to the FlashTool program:

Click (...) button and select: S5292xxxxx_psi.fls
Click (...) button and select: S5292xxxxx_slb.fls
Click (...) button and select: S5292xxxx_bin.fls
Click (...) button and select: S5292xxxxx_cds.fls
Click (...) button and select: S5292xxxxxx.dffs
-Adjust the following settings:

USB Port: 1
Baud Rate: 921600
#Channels: 1
Communication Driver: Infineon USB Driver
Erase whole flash before download

- Click on Next> button

- At the new Window click on Start USB1

- Now make sure the phone is turned off with fully charged battery inside.

- Connect the Samsung S5292 to your computer using the USB cable.

- The FlashTool should detect the device automatically, And will begin to install the new firmware files into your device.

- Do nothing during the update process, And never disconnect the USB cable.

- When the update is done, You will see a green line at the top of the window, And a Success word too.

- When the update is done, You will see a green line at the top of the window, And a Success word too. 

22/6/2017

Kan lawm e

Samuel Tech